MAD100C-0150-SA-M0-FH0-05-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911307990
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAD100C-0150-SA-M0-FH0-05-N1 features a stroke length of 150 mm and a standard SA carriage design. Manufactured by Bosch Rexroth Indramat, it is part of the MAD IndraDyn A Motors series and boasts an IP40 protection class. This unit achieves repeatability up to ±0.01 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Engineered by Bosch Rexroth Indramat, this MAD100C-0150-SA-M0-FH0-05-N1 asynchronous motor is designed for only industrial purposes. The motor uses a fixed terminal box facing the A side for electrical connection. This product supports a multiturn absolute encoder for feedback. The device can be fitted with a GTM series planetary gearbox. This unit supports only low axial shaft loads. It isn’t suitable for machines such as helical driving pinions that generate axial loads. The motor operation is meant only with a drive controller that has a variable output frequency and voltage.
This product’s power connection is present on its upper side. The device needs no additional ground connection. This unit comprises a X3 flange socket on the housing for the encoder connection. Its windings are equipped with two KTY84-130 PTC temperature sensors. The motor’s fan is connected to the supply network using a protective switch and a cable. This product’s housing paint has no resistance to concentrated acids and lyes. The device installation should ensure that there is at least 80 mm of free space between the fan grille and the machine. This unit’s encoder has an absolute accuracy of +/-60°. Its bearings are lubricated by a grease packing.
The asynchronous motor features no labyrinth seal on the shaft. The product’s bearing has a low-nose running action and is suitable for high speeds. The device-related fan must not be used if the surrounding air has abrasive particles or a strong corrosive effect. This unit’s permitted radial force depends on the arithmetic mean speed, bearing lifetime, and point of application of force. Its fan and drive controller operate independently of each other.
Frequently Asked Questions about MAD100C-0150-SA-M0-FH0-05-N1:
Q: What is the admissible axial load of the MAD100C-0150-SA-M0-FH0-05-N1 motor?
A: The admissible axial load of the MAD100C-0150-SA-M0-FH0-05-N1 motor is 30 N.
Q: What is the lifespan of the bearings of the MAD100C-0150-SA-M0-FH0-05-N1 motor?
A: The lifespan of the bearings of the MAD100C-0150-SA-M0-FH0-05-N1 motor is 30,000 operating hours.
Q: What is the ambient installation elevation of the MAD100C-0150-SA-M0-FH0-05-N1 motor?
A: The ambient installation elevation of the MAD100C-0150-SA-M0-FH0-05-N1 motor is 1000 m above sea level.
Q: What is the relative accuracy of the encoder of the MAD100C-0150-SA-M0-FH0-05-N1 motor?
A: The relative accuracy of the encoder of the MAD100C-0150-SA-M0-FH0-05-N1 motor i +/-0.005'.
Q: What is the maximum permitted storage time of the MAD100C-0150-SA-M0-FH0-05-N1 motor?
A: The maximum permitted storage time of the MAD100C-0150-SA-M0-FH0-05-N1 motor is five years.
