MAD100C-0150-SA-C0-AH0-35-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911315795
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAD100C-0150-SA-C0-AH0-35-N1 motor features a rated torque of 15 Nm, natural cooling (C0), an absolute single-turn encoder, and operates within a temperature range of -20°C to +40°C. From the MAD IndraDyn A Motors series by Bosch Rexroth Indramat, it boasts IP65 protection and a rated voltage of 400V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth designs the MAD100C-0150-SA-C0-AH0-35-N1 as a 3-phase motor from the IndraDyn series. It uses a strong axial fan to cool the surface efficiently by blowing air through the enclosure from back-to-front. The fan requires a power input of at least 83 VA on 3x400V or 3x480V with a frequency of 50/60 Hz.
The MAD100C-0150-SA-C0-AH0-35-N1 motor features a simple shaft without a sealing ring to provide minimum friction and it does not incorporate a holding brake. A rated torque of 48 Nm and a nominal speed of 1500 RPM are provided by this motor. Its rated power consumption is 7.5 kW and in some scenarios of overload it can consume up to 15.4 kW of power with its highest torque delivery of 110 Nm. The MAD100C motor’s thermal time constant is 30 minutes and it also supports S6 mode to give a duty cycle of 44% for 10 minutes. The motor’s body enclosure meets IP65 protection and uses class F insulation while the operational thermal condition it can support is between 0 to 40°C. The MAD100C motor requires a wire of 2.5 mm² for electrical connections and comes with an incremental encoder that offers 2048 signal count. At 1 meter, the loudness of this machine is recorded 70 dB(A) and possess capacitance discharge rated at 8.13 nF.
The MAD100C-0150-SA-C0-AH0-35-N1 motor has a maximum current rating of 39 A and a normal value of 19.7 A current. Its torque constant is 2.94 Nm/A and weighs 59 kg with a rotor angular inertia of 0.0284 kg·m². The MAD100C motor is presented in a 35 configuration which supports both flange and foot-type mounting. The rotor can reach up to 9000 RPM with the equipped standard industrial bearings.
Frequently Asked Questions about MAD100C-0150-SA-C0-AH0-35-N1:
Q: Why is a 2048-count incremental encoder used in the MAD100C-0150-SA-C0-AH0-35-N1 motor?
A: The high-resolution encoder enhances positioning accuracy, critical for applications requiring precise motion control. It ensures consistent feedback even in high-speed environments.
Q: How does the 2.94 Nm/A torque constant of the MAD100C-0150-SA-C0-AH0-35-N1 impact performance?
A: This high torque constant ensures greater torque output per ampere, enabling more efficient energy use during dynamic load conditions.
Q: Why is an axial fan with 83 VA input used in the MAD100C-0150-SA-C0-AH0-35-N1?
A: The axial fan provides back-to-front airflow for efficient surface cooling, maintaining thermal stability during high power usage or overload.
Q: Can the MAD100C-0150-SA-C0-AH0-35-N1 support fluctuating load demands?
A: Yes, its 15.4 kW overload capability and thermal time constant of 30 minutes allow it to handle temporary peaks in load without performance degradation.
Q: How does the 35-configuration benefit mounting of the MAD100C-0150-SA-C0-AH0-35-N1 motor?
A: It allows flexibility for both flange and foot mounting, which simplifies integration into a wide range of industrial mechanical setups.
