MAD100C-0100-SA-S2-AG0-35-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911329262
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD100C-0100-SA-S2-AG0-35-N1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD100C-0100-SA-S2-AG0-35-N1 is an asynchronous motor from the MAD motor series, featuring a standard bearing and B35 construction. Referring to its nameplate characteristics, the MAD100C-0100-SA-S2-AG0-35-N1 runs at a base speed of 1000 rpm to deliver a rated current of 13.2 amperes, and a torque of 50 Nm. Compared with other MAD100C motors, the MAD100C-0100-SA-S2-AG0-35-N1 has a relatively low rating speed but a higher torque output. For most AC motors, the torque has an inverse relationship with speed. This trend implies that as the motor speed increases, the torque tends to decrease.
At most, the MAD100C-0100-SA-S2-AG0-35-N1 can reach a maximum speed of 6000 rpm. Operating the machine at this speed, however, lowers the torque output of the motor significantly. If, on the other hand, maximum torque is desirable for a specific application, the MAD100C-0100-SA-S2-AG0-35-N1 must operate at a very low speed. The maximum torque that this machine can deliver is 118.8 Nm. At maximum power, and assuming all other values remain constant, the MAD100C-0100-SA-S2-AG0-35-N1 delivers its maximum current draw of 25.4 A. During operation, the machine has an S2 encoder that determines the motor's relative position and speed.
Before reaching the rated speed, however, the MAD100C-0100-SA-S2-AG0-35-N1 reaches its key speed of 500 rpm, which marks the operating point at which the motor starts to derate. Before the key speed, the continuous standstill torque of 54 Nm and current of 13.8 A apply. Upon reaching the key speed, the MAD100C-0100-SA-S2-AG0-35-N1 derates to the rated values. The MAD100C-0100-SA-S2-AG0-35-N1 has a rated power of 5200 watts and usually operates at a lagging power factor. Since motors are considered inductive loads, their power factor tends to be lagging most of the time, unless a compensating capacitor or synchronous condenser is present in the system.
