MAD100C-0100-SA-S0-BH0-35-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911310617
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAD100C-0100-SA-S0-BH0-35-N1 motor features a 100 mm frame size, a rated torque of 3.18 Nm, a rated power of 1.0 kW, and a robust IP65 protection class. Part of the MAD IndraDyn A Motors series by Bosch Rexroth Indramat, it includes a self-cooled design and operates with a rated speed of 3000 rpm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth’s MAD100C-0100-SA-S0-BH0-35-N1 motor belongs from the IndraDyn series of 3-phase motors. It attains cooling through an axial fan that is configured in blowing mode to provide 230 m³/h of air from side B to side A. The fan needs 3×400 V ±15% or 3×480 V ±10% to operate while utilizing 83 to 100 VA of power.
The MAD100C-0100-SA-S0-BH0-35-N1 motor produces a torque constant of 4.94 Nm/A at 20°C and has a rotational inertia equal to 0.0284 kgm². It takes about 30 minutes to stabilize temperature up to 50% and it can work for 10 minutes in S6 operating mode. The MAD100C motor does not have a shaft sealing ring but possess a plain shaft style with length 60mm and diameter 32mm. There is no brake attached and it uses 50 Nm of torque for smooth and continuous performance. This motor has a rating of 1000 rounds/min nominal speed and a key speed of 500 rounds/min while with the standard greased bearings it can reach the fastest rotations up to 6000 rounds/min. The MAD100C motor has a peak torque value of 119 Nm and during overload conditions its power consumption reaches 10.6 kW. It has 8.5 nF of electric discharge value and uses a connector located on B side of the motor for electrical connections.
The MAD100C-0100-SA-S0-BH0-35-N1 motor has an integrated single-turn encoder with 512 signal periods and sends data using I²C. The encoder works on an 8 V DC power supply and provides a resolution of an absolute value ±0.009° and relative value ±0.01’. The MAD100C motor draws a maximum operating current of 25.4 A and it provides both flange and foot mounting configuration. It uses 3 pole pairs to make sure the torque produced is constant.
Frequently Asked Questions about MAD100C-0100-SA-S0-BH0-35-N1:
Q: Why does the MAD100C motor use 3 pole pairs?
A: Three pole pairs ensure smoother torque generation and reduced ripple, which helps maintain performance consistency during rapid speed shifts.
Q: How does the axial fan cooling benefit the MAD100C-0100-SA-S0-BH0-35-N1?
A: The axial fan’s 230mm³/h airflow prevents overheating during continuous operation, allowing higher duty cycles without performance loss.
Q: Why is the I²C interface used in the encoder of MAD100C-0100-SA-S0-BH0-35-N1?
A: I²C provides faster, low-latency communication for real-time position data, which is essential for precise motion control in automation tasks.
Q: Why is 8.5 nF discharge value important in MAD100C-0100-SA-S0-BH0-35-N1?
A: It helps mitigate electric discharge damage across bearings, enhancing motor longevity and performance stability in high-frequency operations.
Q: What’s the purpose of the 60mm shaft length in this motor?
A: It provides stable coupling in mechanical systems, improving torque transmission and minimizing vibration during high-speed rotation.
