MAD100C-0050-SA-S2-BP0-05-A1

MPN: R911336700

No Tariffs On US Orders
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
Ask for Availability

Preparing your secure checkout page...

MAD100C-0050-SA-S2-BP0-05-A1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.

Quote Request Form:

Warranty
Wake Industrial Warranty
To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The MAD100C-0050-SA-S2-BP0-05-A1 is an asynchronous motor variant that offers 50 rpm with a rated torque of 5.1 Nm. The moment of inertia is 0.0284 kgm2 and the thermal time constant of the machine is 30 min. The constant torque offered is 7.4 Nm/A at 20 C temperature. The duty cycle time for the motor at 100C is 10 minutes at S-6 with 44%. The continuous torque and constant at standstill are 51 Nm, and 8.2 A respectively.     

The discharge capacity of the MAD100C-0050 is 9 nF whereas the mass of this variant is 59 kg without holding brake. The cooling system installed to cool the winding is through the axial fan. The encoder installed in this asynchronous motor is a single-turn absolute encoder. The increment in the encoder is 2048, and the electrical power is connected through connectors on the B-side. The rated power of the machine is 2.7 kW with a power wire cross-sectional area of 1 mm2.

The shaft of this model is balanced with the entire key and comes with a sealing ring. This variant of asynchronous motor has no holding brake. The mounting style is simple and only based on flange mounting. The length of the motor is C and the frame size of the motor is 100. The winding type is 0050 and it has the same rate as well as a key speed of 500 revolutions per minute. The maximum torque that this machine can generate is 112 Nm from a maximum power extraction of 5.5 kW. For protection purposes, this variant of the machine is advised to run in the temperature range of 0 C to 40 C.

Bearing
Standard
Cooling Mode
Axail Fan, Blowing
Encoder
Singleturn Absolute, 2048 increments
Mounting Style
Flange
  • MAD100C0050SAS2BP005A1
  • mad100c-0050-sa-s2-bp0-05-a1
  • MAD100C 0050 SA S2 BP0 05 A1

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo