MAD100B-0250-SA-C0-SQ0-35-N1

Product Description:

The MAD100B-0250-SA-C0-SQ0-35-N1 asynchronous housing motor manufactured by Bosch Rexroth encompasses a fan that operates independently of the related drive controller. This motor has reduced output when it is operated outside the ambient ranges. The product features a 3K4 operating class as per DIN EN 60721-3-3 specifications. This device encounters vibrations in the form of sinusoidal oscillations in stationary use. The unit portrays a shock load based on the maximum permitted acceleration in non-stationary use like transport. It features an output shaft with a keyway.This motor is balanced with a keyway. The product has no shaft sealing ring. This device portrays an IP 54 protection class for the output shaft. This device supports an additional layer of paint of a maximum thickness of 40 um over the existing coat on the housing. The unit allows foot assembly installation with the feet at the bottom. It supports radial forces only perpendicular to the mounting surface with foot mounting.

This motor must be free of impact on the output shaft. The product may face premature bearing failure because of mechanical damage. This device features reduced grease life for the bearings if the operation takes place under unfavorable conditions. The unit meets UKCA requirements. Its fan grille should not be cleaned using a water jet.This motor should not be subject to repeated high-voltage inspection tests. The product-associated key technical details can be found on its rating plate. This device encompasses lifting eyebolts on its housing for lifting or transporting it. The unit must not be lifted by the fan housing. It must be free of salt mist on its surface. This asynchronous housing motor must be checked for corrosion-free contacts if the storage period is between one and five years.