MAD100B-0200-SA-S2-AQ0-05-N1

Product Description:

The MAD100B-0200-SA-S2-AQ0-05-N1 asynchronous housing motor introduced by Bosch Rexroth must be commissioned only after checking its electrical and mechanical connections. This motor has an insulation system with a high dielectric load. The product can be shut down only after the protection switch for its fan is switched off. This device may trigger fatal injury if it is worked on in the active state. The unit is likely to have limited availability if it is operated under unfavorable conditions. Its fan must be activated and checked for proper functioning as part of the commissioning process. This motor tends to restart automatically after a power failure if voltage is applied.The product belongs to the MAD product group of similar motors. This device tends to malfunction if the internal temperature sensor is defective. The unit portrays an excessively high housing temperature if the fan is faulty. Its fan must be disconnected from the motor before any repair is done on it.

This motor tends to depict vibrations if the driven machine elements are not coupled properly. The product is manufactured using resource and energy optimized production processes. This device incorporates permanent magnets in its rotor. The unit must be serviced or repaired only by people with the relevant expertise. It has no additional ground conductor connection.This motor must be assembled such that there is no damage to the receptacle on the plant side. The product needs a cable or cable jacket replacement if there are porous parts after a storage period of five years. This device should be protected against direct sunlight during its storage period. The unit features a relative air humidity of 75% at 30 degrees C when it is transported. Its lifting eyebolts must be screwed down completely to the contact surface before they are used to lift the motor. This asynchronous housing motor must not be subject to repeated high-voltage tests by the customer.