Product Description:

The MAD100B-0200-SA-M2-AQ0-35-N1 is a servo motor manufactured by Bosch Rexroth Indramat within the MAD IndraDyn A Motors series. In automated machinery, the unit converts commanded electrical power into precisely regulated rotary motion that drives axes, spindles, or transfer elements. Its design supports closed-loop drive systems that require consistent torque delivery, position feedback, and compatibility with modern digital controllers used across packaging, material-handling, and general motion platforms.

Thermal control is provided by an axial fan that forces air along the housing to keep winding temperatures within allowable limits. Position data are supplied through a multi-turn absolute encoder EnDat 2.1 interface with 2048 periods, enabling high-resolution feedback for synchronous speed regulation. The rotor shaft is balanced with a full key and is supplied without a shaft seal, and the motor is built without a holding brake, so external means must secure load positions when power is removed. Electrical insulation follows insulation class F, giving the windings a permissible limit of 155 °C during intermittent duty. The motor has a nominal speed of 2000 rpm, and all live components are contained within an IP65 enclosure that blocks dust ingress and low-pressure water jets. Standard rolling bearings and vibration grade R help keep radial displacement and vibration within values tolerated by precision drive trains.

The housing supports flange and foot mounting, allowing installation on either a base plate or a face panel for the 100 mm frame size. The B length variant balances torque capacity with compact depth, and power and signal conductors terminate on the A-side through a keyed circular connector. Continuous service is permitted at ambient temperatures from 0–40 °C, matching typical cabinet or open-plant conditions. The stator uses winding code 0200, which matches the coil impedance expected by standard IndraDrive amplifiers.