Product Description

Bosch Rexroth is a universal manufacturer and supplier of industrial automation systems and drive control products.

The MAC160C-0-ED-4-C/250-R-1/DI524LV/S001 is a high quality servo motor that is used as a highly responsive servo drive used in conjunction with the modern drive controllers manufactured by the company. The servo motor has been made compatible with the DSC, KDS, and TDM drive controllers manufactured by the company. This motor is excited using powerful permanent magnets and is equipped with electronic commutation to ensure peak torque availability at varying motor speeds. The permanent magnets used in this model allow the construction of rotors with very low inertia. This motor is equipped with a tacho feedback system at one side that contains the tacho generator with rotor position feedback. The motor has been manufactured to ensure a high degree of operational reliability because of improved structural features.

The MAC160C-0-ED-4-C/250-R-1/DI524LV/S001 has a brushless design and its bearings have been pre-lubricated for their entire lifetime. These arrangements ensure a maintenance free operation. The motor can be employed in areas where the working conditions are poor and the motor might be exposed to coolants and soluble oil emulsions. In addition, the motor can also safely function when exposed to water jets and dust because of its outer enclosure protection which is in line with the IP 65 standards. The motor can also be equipped with a holding brake that can hold the motor’s shaft in a fixed position during standstill mode. The motor performs perfectly between temperatures of 0 degrees to 45 degrees Celsius and in areas where the installation altitude is below a 1000 meters above sea level.