Product Description

The MAC160B-0-GD-2-C/250-R-0/S001 is an AC (Alternate Current) servo motor with a weight that is roughly 8.8 kilograms. This rotor is a component of the MAC line-up and is manufactured by Bosch. For this Alternate Current motor, the rated power usage for axial as well as radial cooling sits at 22/22 Volts-Amperes (VA). For both radial and axial cooling, the nominal voltage is determined at AC (Alternate Current) 115-230 (alternate current). The frequency specification is 50/60 (Hz/hertz). The mass for axial cooling is roughly 0.8 kilograms, while for radial cooling it is approximately 0.7 kilograms.

The MAC AC servo motor is known for its outstanding reliability due to its distinctive structural characteristics. Enjoy hassle-free operation with a brushless motor and lifetime greased bearings. The bearing rally design permits for the direct installation of pinions as well as belt pulleys, enabling the utilization of heightened radial loads. The motor shaft encounters a noticeable integration of external forces. The floating carriage on Side A of the rotor soaks up the exceeding radial forces. Side B is responsible for capturing the exceeding axial forces.

MAC AC (Alternate Current) servo motors are permanent magnet-excited motors with electronic commutation, making it suitable for both light and heavy duty factory requirements. The rotor's permanent magnets are made up of materials that enable the construction of motors with very little inertia. This MAC160B-0-GD-2-C/250-R-0/S001 AC servo motor's motor feedback usually consists of a tacho feedback. In addition, a mounted encoder can be included to the motor for position evaluation. For evaluating speed and acknowledging rotor position, the motors have been fitted with a specially developed tacho feedback intended for this series.