Product Description

The MAC114A-0-ED-4-C/130-B-1/WI524LV/S010 from the MAC series is manufactured by Rexroth Indramat Group. AC servo motors use encoders to operate. The controller that provides closed-loop control and feedback is used in the operation of this servo motor. These servo motors are mostly used in industries such as pharmaceutics and in-line manufacturing due to their advanced features. The alternating current (AC) of an AC servo motor flows in reverse order. The current changes several times every second.

A transformer transfers high-voltage currents over long distances to enable the flow of alternating currents. To keep the motor temperature within range, the MAC114A uses a fluid such as gas or air to transmit heat to the surroundings. The ED winding is used in the motor to optimize it for standard applications. The incremental encoder is used to provide data output related to the shaft's motion, including position, speed, and distance. Standard mounting is used to install the incremental encoder. This type of mounting is intended to be used with machines that have low shock loads.

The incremental encoder converts the angular position of the shaft into a digital signal or pulse using an optical disk. The 524LV encoder uses 5 V voltages to generate 625 lines or pulses per revolution of the rotor. The pilot diameter (130mm) and a standard blocking brake (45 Nm) are employed in the MAC motor. The motor may spin freely after the brake is released when the power turns on and cease when the input power turns off. The motor's higher cyclic load capacity allows for continual start-stop operations and high repetition rates because of electric commutation. Due to its exceptional speed-to-torque strength, the AC motor provides optimal efficiency for a wide range of applications.