Product Description

The MAC112D-2-ED-4-C/130-A-0/DI520LV/S021 servomotor provided by Bosch Rexroth comprises an incremental encoder for its position evaluation. This servomotor is not adversely affected by soluble oil emulsions and coolants. The product is prevented against overload damage by the thermos switches that monitor its temperature during use. This device installation altitude can never exceed 5000m over sea level. The unit supports an additional paint layer of a maximum of 40µm thickness on its housing. Its shaft can face either downward or upward with vertical mounting. This motor has an encoder code of 520. The product encounters thermal stress when bevel gear pinions are used. This device has a length code of D.

The motor needs grind in to be done for commissioning after storing it for more than two years. This product houses a straight encoder connection to deliver tacho feedback. The device includes a connecting cable for the thermos switches in the associated power connection. This unit allows the selection of a tacho voltage to match its nominal speed. Its blower is integrated as per customer requirements into the hardware circuitry. The motor deploys shock-damped mounting for the incremental encoder that functions using sinusoidal signals. This product has a 120mA current consumption and a 5V +/-5% voltage rating for the encoder. The servomotor comes along with backup support valid for one year and is shipped to your choice of destination.

This device needs to be cooled down for a considerable time after it has been turned off. The unit uses its incremental encoder to evaluate its position. It experiences heat dissipation from the windings of the stator at the time of operation. The motor paint portrays resistance to yellowing and weathering. This product allows pinions to be connected on the shaft with pressure sleeves, clamping sets and other such clamping components. Its load factors have to be multiplied when both the installation elevation and ambient temperature are exceeded.