Product Description

The MAC112D-2-ED-3-C/130-A-1 servomotor offered by Bosch Rexroth works like a rapid-response drive when it operates along with a drive controller by the same manufacturer. This servomotor utilizes its tacho feedback for position recognition of its rotor. The product has maximum motor speed based on the DC bus voltage generated by the supply source at the drive. This device-related axial force is calculated by means of a formula in terms of its radial force. The unit is operated with a wide range of industrial machines. Its axial forces are absorbed by its B side. Its housing is completely sealed as per the IP 65 protection rating.

This motor utilizes a mounting flange featuring windings for mounting as per Design B14. The product portrays protection against the penetration of dust. This device does not get damaged by a jet of water sprayed on it. The unit has an IP 65 protection category for the output shaft and the second shaft end. Its longitudinal axis has a 2Hz to 9Hz frequency range with sinusoidal oscillations. This motor incorporates no general solution for shock-damped mounting. The product allows an additional paint layer to be coated on its surface. This MAC112D-2-ED-3-C/130-A-1 servomotor comes with backup support for one year.

The device has 35Nm continuous torque with natural convection in standstill mode and 60K overtemperature at the housing. This unit mounting is possible in six possible orientations. Its mounting flange has a customized pilot diameter. The motor allows belt pulleys to be coupled on the plain shaft. This product cannot support axial surface cooling with the second shaft end as part of the feedback. The device housing supports radial surface cooling. This unit has a 24V voltage rating for its blocking brake. Its commissioning must be done after grinding it in when the storage period is over two years. This servomotor shipment is carried out in custom military-grade packaging.