Product Description

The MAC112D-1-HD-4-C/130-B-2/WA608XX/S018 AC servomotor from Bosch Rexroth operates with the manufacturer’s TDM range of drive controllers. This servomotor is widely used in machine tools. The product is excited by permanent magnets. The product deploys tacho feedback. This device has a high level of operational reliability. The unit incorporates a special windings design. It has separate flanged sockets with connectors for the direct connection of power, encoder and tacho feedback cables. This motor is designed for operation between 0°C and 45°C. The product supports mounting as both Design B5 and Design B14. This device comprises a black prime coat over its housing.

The motor comprises a 60Nm heavy-duty blocking brake. This unit portrays a speed based on the drive that is used with it. It encompasses a shaft with a keyway as per DIN 6885-1 specifications. The product incorporates bearings with a lifespan of 30,000 operating hours. This device features circular connectors for its power connections. The unit uses a power cable with a maximum length of 75m. It uses straight connectors with extension sleeves for axial surface cooling. This motor must use shielded cables that have to be routed separately from mains control and load voltage lines. The servomotor has a one-year warranty.

This product houses a type plate with its type designation and key technical details. The device comes with a couple of M8 tapped holes in its housing. This unit replacement can be done after checking the reference point settings. It portrays low inertia because of the choice of materials used to design the permanent magnets. The motor has an absolute or incremental encoder mounted on it. This product portrays a simplified installation process. The device connection must be established with the readymade cables from its manufacturer. This unit utilizes its blocking brake to hold the output shaft in standstill mode. The MAC112D-1-HD-4-C/130-B-2/WA608XX/S018 servomotor is shipped globally.