Product Description

Bosch Rexroth adopts cutting-edge technology in the development of its drive and automation units. This is obvious in the quality of its MAC AC servo motors used to build rapid-response servo drives with the DSC, TDM, and KDS drive controllers. They are used in robotics and transfer facilities.

The MAC112D-1-HD-3-C/130-A-2/S013 is a servo motor in the MAC series designed and manufactured by Bosch Rexroth. It has in-built thermo switches integrated into its motor windings and stator housing to prevent permanent damage due to overheating. Like other MAC motors, it also displays a high overload capability owing to the energy-efficient elimination of heat from its stator windings. Generally, the motor is cooled by surface cooling and is ideal for extreme loads like continuous start-stop operations with high repetition rates. Electronic commutation is a feature of this motor that also makes it suitable for such operations. It gives the motor a high cyclic load capacity to withstand continuous stress cycles without reducing efficiency.

Constructed with a brushless design, there is less risk of wear and tear with the MAC112D-1-HD-3-C/130-A-2/S013. This design also aids the motor’s maintenance-free operation, with its lifetime-lubricated bearings. As a product of the IP 65 protection category, it is suitable for use in poor environmental conditions caused by the effects of agents like coolants and soluble oil emulsions. Its housing coat is a black prime varnish with impressive resistance against lyes, yellowing, weathering, chalky buildup and dilute acids. The servo motor’s rotor has permanent magnets made from unique materials that give the motor low inertia. It should be installed at a maximum height of 1,000m above mean sea level.