Product Description

MAC112D-1-FD-3-C/180-A-0/S003 is a servo motor. It is designed by Bosch. MAC motors are used for industrial applications. MAC motors are used as components in high-performance MAC servo systems that also include a controller and a programming module. The MAC112D-1-FD-3-C/180-A-0/S003 is motor with 2000 RPM speed rating. Operators can specify several features for MAC motors including the cooling method, shaft type, optional blocking brake and location of the power plug. The MAC112D-1-FD-3-C/180-A-0/S003 motor is designed for surface cooling which is also known as forced-air cooling. The axial cooling fan operates at 230 Volts AC. The power plug is on side A of the motor housing. The power connector has to be ordered separately. The motor does not feature a blocking brake. Centering diameter of the motor is 180 millimeters. Length of the motor is approximately 535 millimeters.

The MAC112D-1-FD-3-C/180-A-0/S003 supports tachometer feedback. The tachometer connector must be ordered separately. MAC motors require 0 to 45 degrees Celsius temperature for optimal performance. Motor use outside this range leads to performance degradation. The ambient temperature recommended by Bosch for MAC motor storage is -20 to 80 degrees Celsius. Protection category of MAC motor is IP65. The housing of the motors is painted with a black prime coat. An additional layer of paint can cover this prime coat. The thickness of the layer may, however, not exceed 40 millimeters. This prime coat is resistant weathering, yellowing and chalky build-ups as well as diluted acids and lyes. The coat can peel if the housing is frequently cleaned with a steam cleaner. To prevent installation errors, only trained and experienced personnel should be allowed to participate in motor installation and operation.