Product Description
The servo model is equipped with tacho feedback and is capable of rotating at a high speed of 2000 revolutions per minute. The MAC112D-0-FD-2-C/130-A-2/S013 motor's tacho feedback is vital for tacho-generator speed evaluation and rotor position identification.
The MAC112D AC servo motor is a permanent magnet-excited motor with electronic commutation. Permanent magnets on the rotor are made from substances that enable the development of a motor with an extraordinarily low moment of inertia of 230 x 10-4 kgm2. The power connection for the servo motor is positioned on the A side of the motor housing (sides are labeled in the user manual that comes with the motor). The model generates a continuous torque of 38 Nm while using 56 A of continuous current during natural convection at a standstill operation. For best performance, the motor must be paired with an appropriate drive controller. Due to its high IP65 protection certification and F insulation level, this MAC112D AC servo motor is suitable for use in challenging environments. The model weighs 59 kilograms and has a thermal time constant of 90 minutes.
The model MAC112D-0-FD-2-C/130-A-2/S013 housing contains an extra layer of black paint with a maximum layer thickness of 40 micrometers. The housing uses natural convection to disperse heat. The model contains a holding brake having a holding torque of 40 Nm and a rated current of 1.35 A. The holding brake has a weight of 3.5 kilograms. This AC servo motor has a 130 mm centering diameter and an operating temperature range of 0 to +45 degrees Celsius. Wake industrial has this item (MAC112D-0-FD-2-C/130-A-2/S013) in stock and can promptly deliver it to your desired location.