Product Description

The MAC112D-0-15S-3-C/130-A-0 is a rapid-response AC servo motor manufactured by Bosch Rexroth Indramat in conjunction with TDM, DSC and KDS Drive controllers. The permanent magnets inside the motor are made of exceptional material, which ensures low inertia. It has one tachofeedback for speed evaluation and a second shaft. The product is designed per the guidelines of DIN 40 050, making it highly robust and tolerable against penetration of water and extrinsic objects. 

The motor has a natural convection cooling with flange type 11/65 edition, making mounting possible. As for the power connection, this servo motor has a connector to side A. Opposite to that is the tachofeedback connector, which can be straight or angled. While this variant has no built-in blocking brake, users can install it with other extra heavy-duty blocking brakes of 60Nm. The shaft end (DIN 748 section) is 7/75 edition and cylindrical in shape. Multiple shaft types can be equipped, but the plain shaft is recommended. However, it also supports an output shaft with a keyway of 8/68 edition. The special centering diameter of this site is ø 180 j6.

The tacho type inside this servo motor is standard, and voltage is set per nominal motor speed: 1.5V/1000 min^-1. The nominal RPM of the motor is >3000 min^-1. The end of the second shaft has a special IP 65 protection category. Therefore, the component mounted needs no special sealing precaution. As per the B05 and B14 designs, the flange type comes in throughhole and thread variants. For the output direction of the electrical power connector, you can select the direction at the time of order. We can deliver this motor of the Mac 112 series worldwide at any address.