Product Description

The MAC112B-0-LD-2-C/130-A-0/S037 is a state-of-the-art synchronous servo motor designed by Bosch Rexroth Indramat to operate as a reliable source of kinetic energy for industrial production and processing machines. This servo motor is a compact device with an housing unit that provides protection according to the IP65 protection class, it is intended to be used with the TDM, KDS, and DSC drive controller series. The MAC112B-0-LD-2-C/130-A-0/S037 servo motor is also a permanent magnet excited device, the magnets present in the motor are made from rare earth devices and are responsible for the characteristic low inertia of the motor during operation. The motor also has electronic commutation that allows it to undergo continuous start-stop operation at a high repeat frequency.

The MAC112B-0-LD-2-C/130-A-0/S037 industrial servo motor operates features a tacho feedback which carries out speed evaluation through a tacho generator and rotor position recognition. The tacho feedback operates at a high resolution and helps the motor to maintain smooth operation. The nominal input current of this industrial servo motor when it is at a standstill is about 26.3 newton meters, at this current the motor generates an output torque of about 17.5 newton meters. Also, the nominal speed generated by the motor is about 2000 revolutions per minute.

The MAC112B-0-LD-2-C/130-A-0/S037 industrial servo motor features two electrical connectors which are integrated into its housing unit, the connectors maintain the IP65 protection of the motor housing and they serve as interface through which the power and motor feedback cable enter the motor. The permissible ambient temperature for the operation of this industrial motor is between 0 to about 45 degree celsius, however during transportation and storage the motor can be kept at an ambient temperature as high as 80 degrees.