Product Description

The MAC112B-0-GB-3-C/130-A-1 industrial servo motor is a synchronous servo motor manufactured by the reputable Bosch Rexroth Indramat to operate in combination with the TDM, KDS, or DSC drive controller series and form a rapid response system that can meet the kinetic energy requirements of a wide range of industrial machines. This servo motor is designed according to international quality standards, it is especially well suited for use in machine tools, textile machines, printing presses, robotic machines, and handling equipment. The motor is a also a permanent magnet excited device, during operation it maintains a low inertia, and can undergo continuous start-stop operation at a high repetition rates. The MAC112B-0-GB-3-C/130-A-1 industrial servo motor features a brushless design and special grease lubricated ball bearings that support the load connected to the output shaft of the servo motor.

Special thermo switches are integrated the windings and stator housing of the servo motor, the thermo switch protects the motor from overload damage by monitoring the temperature in the motor. The continuous input current required by this industrial servo motor when it is at standstill, is about 41 amperes, the motor also generates an output torque of 16.0 newton meters. Also under normal operating conditions, the motor maintains a nominal speed of about 3000 revolutions per minute.

The MAC112B-0-GB-3-C/130-A-1 industrial servo motor does not require an air blower during operation, the excess heat generated by the servo motor is dissipated via natural convection. Also, a standard holding brake is integrated into the servo motor, the holding brake functions to retain the load connected to the motor when the motor is at a standstill. The total weight of the MAC112B-0-GB-3-C/130-A-1 motor is about 36 kilograms.