Product Description

The MAC093C-0-FS-4-C/110-A-3/WI520LV is one of the most cost efficient and durable industrial servo motors available in the market. It is a permanent magnet excited device designed by well trained engineers of the reputable Bosch Rexroth Indramat according to American and International safety standards. This servo motor is designed under ideal industrial conditions, it features a reinforced housing unit that meets the IP65 protection class, and can maintain its optimum operation in poor environmental conditions. This industrial motor maintain a low intertia during operation, it also features an electronic commutation that helps it to undergo a continuous start-stop operation at a high repeat frequency. The motor is delivered as a standard device that does not require maintenance operation, opening the housing of the motor for maintenance will void the warranty covering the motor and can cause industrial accidents.

The MAC093C-0-FS-4-C/110-A-3/WI520LV industrial servo motor operates at a nominal motor speed of about 3000 revolutions per minute. Also at standstill, the motor operates with a continuous input current of 35 amperes and generates a continuous output torque of 19.5 newton meters. The servo motor does not generate too much heat during operation, the little heat it generate can be efficiently dissipated from its housing unit via natural convection. As a precaution, thermo switches are integrated into the housing of the motor to monitor the temperature in the motor winding and stator housing.

The MAC093C-0-FS-4-C/110-A-3/WI520LV industrial servo motor features an extra-heavy duty holding brake, the holding brake retains the load connected to the motor housing when the motor is at standstill. The servo motor belongs to insulation class F and has a total weight of 22 kilograms