Product Description

The MAC093A-0-WS-4-C/110-B-0/DI11LV/005 AC servomotor by Bosch Rexroth has a floating bearing on side A. This motor encompasses an incremental encoder with a shock-damped mounting style. The product is mounted as per Design B05 or Design B14 by using a mounting flange with throughholes or windings. The device always has a high-resolution tacho feedback. This unit performs electronic commutation that results in high cyclic load capacity to support continuous start-stop operations with a high rate of repetition. It incorporates no standard solution for the shock-damped mounting of its encoder. The motor is an ideal option for deployment in printing presses. This product comes without any blocking brake. The device has an IP 65 protection rating. This unit has an acceleration amplitude of up to 20 m/s2 for its lateral axis. Its prime coat on the housing is resistant to chalking. The motor has a standard pilot diameter of 110 mm for its mounting flange. This product encounters a load on the output shaft as soon as it is affected by radial or axial forces. The device has a length of 275 mm. This unit related power and tacho feedback connectors must be ordered separately. It is not possible to use an angle connector for feedback. The servomotor must be grounded to the drive amplifier before it is turned on for operation. This product portrays a cylindrical shaft end as per DIN 748 specifications. The device supports both soldering and crimping of its power cables with metric diameters. This unit related encoder has a load capacity of 60 mA with high and low signals when the voltage source is between 10 V and 16 V. It has a DS M8-19 center spigot in its connectors. The motor portrays a winding resistance of 1.313 Ohms at 20 ?C.