Product Description

The MAC093A-0-LS-4-C/110-B-0/WI524LV AC servomotor by Bosch Rexroth deploys tacho feedback that is exclusively intended for motors of this series. The motor comprises no blocking brake. This product has an incremental encoder for additional feedback. The device supports a storage and transportation temperature ranging between -20 ?C and 85 ?C. This unit has a nominal speed of 4000 min-1. It dissipates heat from the windings integrated into its stator to the external wall of the motor housing when it is in use. The motor surface is likely to be hot during and for a brief while after operation. This product has a bearing assembly that is designed to support the application of high radial loads. The device depicts a compact construction coupled with a brushless design. This unit supports two options for the mounting flange with either throughholes or windings for Design B05 or Design B14 mounting. It portrays Type L shock-response spectrum for its longitudinal axis as per IEC 721-1 specifications. The servomotor has a black coat that is resistant to weathering on the housing. This product has an IP 65 protection rating for the shaft on side A because of the shaft sealing. The device portrays a shift in the position of the shaft end by 0.6 mm with respect to its housing when thermal deformations occur. This unit deploys a standard mounting style for its encoder. Its encoder is associated with a reference point that can be set manually to a defined angular position. The motor has a supply voltage of 5 V or 10 V to 16 V for its encoder when it works with square-wave pulses and 5 V when sinusoidal signals are used.