Product Description

MAC090C-1-KD-3-C/110-A-1/S005 is an industrial MAC servo motor. It is designed and manufactured by Bosch Rexroth. The motor works in combination with a compatible servo controller such as those from the DSC, TDM, and KDS product lines. Typical MAC motor applications include packaging machinery, textile machines, printing presses and robotics. Salient features of MAC motors include use of permanent magnets, support for electronic commutation, support for tacho feedback, optional absolute or incremental encoder, and an optional blocking brake. The MAC090C-1-KD-3-C/110-A-1/S005 is a motor with an IP65 rated housing that protects motor components from dust and from potential damage from low-pressure jets of water. The motor centering diameter is 110 millimeters. Each MAC motor gets electrical power from the connected servo controller. Bosch provides four options for the power plug location. Operators can easily choose the location that best suits their requirements.

The power plug on the MAC090C-1-KD-3-C/110-A-1/S005 motor is located on side A of the motor housing. The motor has a plain shaft with shaft sealing. Bosch does offer the option for shaft with keyway for its range of MAC motors. An optional blocking brake is installed on the motor. Holding torque rating of this brake is 6.5 Nm. If required, operators can order a brake with a higher holding torque rating of 14 Nm. MAC motors support surface cooling and convection cooling. The MAC090C-1-KD-3-C/110-A-1/S005 is a motor that supports surface cooling. It is equipped with an axial cooling fan that requires 230 Volts AC power supply. Speed rating of the motor is 2000 RPM. Mass of the MAC090C-1-KD-3-C/110-A-1/S005 motor is 23 kilograms. Operators and technicians must follow recommended precautions when handling and installing the servo motor.