Product Description

MAC090C-1-GD-4-C/110-A-1/WA606XX is a MAC servo motor. It is designed by Bosch Rexroth. The speed rating of the motor is 3000 RPM. It is called a servo motor because it provides feedback. Different sensors installed on the motor measure speed and position. This information, known as feedback, is sent to the connected motor controller. The controller provides power for the motor. It also controls motor speed and position. Availability of accurate and real-time feedback allows the controller to ascertain the difference between the actual and desired values for motor speed and position. MAC motors are equipped with a tacho meter for speed evaluation, and with an incremental or absolute encoder for position evaluation. The MAC090C-1-GD-4-C/110-A-1/WA606XX motor is equipped with a standard tacho generator. The motor features a standard blocking brake that provides 6.5 Nm holding torque.

The brake is a safety device designed to prevent unintentional shaft rotation. It operates at 24 Volts DC and draws 0.7 Amps current. Release delay of the brake is 60 milliseconds. Clamping delay for the holding brake is 02 milliseconds. Compared to convection cooling, surface cooling allows motor to deliver higher values of output torque and current. The MAC090C-1-GD-4-C/110-A-1/WA606XX is motor with an axial cooling fan that operates at 230 Volts AC. Its continuous torque at standstill is 16 Nm and the continuous current at standstill is 41.3 Amps. Thermal time constant for the servo motor is 45 minutes. Weight of the motor is approximately 23 kilograms. The main power plug is located on side A of the housing. Operators can select different options for power plug location based on their requirements. Centering diameter of the servo motor is 110 millimeters.