Product Description

Bosch Rexroth creates its drive and motion control products to improve productivity for a wide range of industrial applications. Its innovative MAC motors are combined with the TDM, KDS and DSC drive controllers to yield rapid-response drives.

The MAC090C-1-GD-2-C/110-B-0/S014 is an AC servo motor in the MAC series by Bosch Rexroth. It features an axial surface cooling unit mounted to enhance heat dissipation and increase its thermal efficiency. This surface cooling makes the motor suitable for extreme loads like continuous start-stop operations with high repetitive frequencies. The motor’s high cyclic load capacity also supports such operations, as it can withstand repeated stress cycles without failing due to fatigue. This cyclic load capacity is owing to electronic commutation in the MAC motor. Rare-earth materials are used in the permanent magnets of the motor’s rotor to give it a low inertia. As a result, the MAC model displays an improved dynamic performance and has a quicker response time.

As a servo motor with tacho feedback, the rotor position and velocity of the MAC090C-1-GD-2-C/110-B-0/S014 can be detected and evaluated with impressive precision. This tacho type is standard. The servo motor’s nominal speed is 3,000 revolutions per minute, and it has a centering diameter of 110mm. Its housing is built to prevent the penetration of solid external materials and water jets sprayed at it from different directions. This allows its safe use within the direct working area of the machine, even under harsh environmental conditions. Based on this, it belongs to the IP 65 Ingress Protection category according to DIN 40 050. Its power, encoder, and tacho feedback cables also correspond to this protection category.