Product Description

MAC090C-0-KD-4-C/130-A-1/WI566LX/S017 is a Bosch Rexroth servo motor from the MAC product line. Its speed rating is 2000 RPM. The continuous torque at standstill is 10.4 Nm. Continuous torque at standstill refers to the amount of torque that a motor can continuously produce when it is not rotating or in a stationary position. In other words, it is the maximum torque that a motor can provide without any rotational movement. Continuous current at standstill for the MAC090C-0-KD-4-C/130-A-1/WI566LX/S017 motor is 17 Amps. Continuous current at standstill refers to the amount of electrical current that a motor draws when it is in a stationary position or not rotating, while operating under continuous load. It indicates the steady-state current consumption of the motor without any rotational movement. Moment of inertia of the motor rotor is 0.0053 kg m². Moment of inertia refers to an object's resistance to changes in its rotational motion.

A low moment of inertia means that the object can respond more quickly to changes in rotational speed or direction. The benefit of having a low moment of inertia is that it allows for faster and more efficient acceleration and deceleration in mechanical systems. Bosch has designed the MAC090C-0-KD-4-C/130-A-1/WI566LX/S017 motor for convection cooling. Convection cooling refers to the process of dissipating heat from a surface or object through the movement of a fluid, typically air or a liquid. It relies on the principle of convection, which involves the transfer of heat through the motion of a fluid medium. The motor supports tacho feedback via standard tacho generator. The motor is also equipped with a blocking brake with 6.5 Nm holding torque rating. Protection category of the MAC090C-0-KD-4-C/130-A-1/WI566LX/S017 motor is IP65. Weight of the motor is 23 kilograms.