Product Description

The MAC090C-0-KD-3-C/130-A-0/S011 AC servomotor from Bosch Rexroth is used in conjunction with a  drive controller by the manufacturer. This motor operates as a rapid-response drive when used with the drive controller. The product is widely used in machine tools. This device belongs to the MAC product group of such offerings. The unit is excited by permanent magnets during operation.  It has two sets of windings. This motor is associated with tacho feedback. The product portrays a high degree of reliability. This device is delivered without a holding brake. The unit features its output shaft to the A side. It is designed to be used within the ambient conditions specified by the manufacturer.

This motor features protection by means of its covers and housing. The product encompasses a shaft sealing around the output shaft. This device makes use of a mounting flange featuring throughholes to support mounting as per Design B5. The unit mounting is allowed both horizontally and vertically as per DIN IEC 34-7 specifications. Its output shaft can be either a plain and smooth shaft or a shaft with a keyway. This motor is subject to radial and axial forces during operation. The product comprises a second shaft end on side B. This MAC090C-0-KD-3-C/130-A-0/S011 servomotor has a one-year warranty.

The device has an IP 65 protection category for the second shaft end. This unit has a maximum speed based on the DC bus voltage generated by the supply source at the drive. Its operating curves highlight the speed-limiting data and the torque-limiting data. The motor is to be transported using suitable lifting equipment. This product comprises spigot nuts on the connectors. The device has separate cables for its power and tacho feedback electrical connections. This unit deploys natural convection cooling mode. It incorporates no standard solution for shock damped mounting. The servo motor can be shipped globally.