Product Description
The Bosch Rexroth MAC090C-0-KD-3-C/110-A-0/S005 AC servomotor is a rapid-response servo drive that is built to work in conjunction with KDS, TDM, and DSC drive controllers. There is tacho feedback for speed evaluation and a second shaft to mount an additional encoder. The second shaft end of the motor has the IP 65 protection category. This means the component mounted need not be sealed completely. The blower of the servomotor is integrated into the hardware circuitry via a protective motor switch. The device should not be picked up at the blower, as this can damage the blower.
The MAC motor portrays smooth-running qualities due to the high-resolution tacho feedback and the unique design of the stator. At the shaft of the motor, a defined assimilation of outside forces is present. There is a floating bearing on Side A, which absorbs the radial forces. The unit can be mounted in any position. The flange has through holes in it, which makes it possible to mount the motor as per IM B5 or IM B14 design. Additional installation work is not required because of the availability of a wide range of readymade cables.
The servomotor should be stored in a dry environment that is free from shocks and dust. The permissible storage and transport temperature of the device is between -20°C and 80°C. The housing of the product is painted black. The mass of the motor is 23 kg. The nominal speed of the device is 2000 per minute. The product is cooled by natural convection. The thermal time constant of the product is 60 minutes. The motor is not equipped with a blocking brake.