Product Description

The MAC090C-0-KD-1-B/110-L-1/DI01250 AC servomotor offered by Bosch Rexroth has its power connector directed to the left. This motor is operated in textile machinery. The product features low inertia because of the choice of materials used to design its permanent magnets. This device is integrated with tacho feedback all the time. The unit features protection against overload damage due to the motor temperature monitoring functionality. It is not associated with any special windings design. This motor is not affected by the spraying of a jet of water. The product is equipped with both lateral and longitudinal axes. This device features no generally applicable solution for shock-damped mounting.

The motor permits the thickness of the coat on its housing to be increased by up to a maximum of 40µm thickness. This unit mounting is allowed both horizontally and vertically as per DIN IEC 34-7 specifications. Its mounting flange comprises a standard pilot diameter. The product achieves a form-fitting torque transmission with its keyway shaft. This device is safeguarded against the penetration of liquids into the shaft along the housing by means of the shaft sealing. The unit may get damaged on the B side if bevel gear pinions are incorporated. This MAC090C-0-KD-1-B/110-L-1/DI01250 servomotor encompasses backup support for one year.

The motor-blocking brake offers no assurance of personnel safety when it is in use. It is possible to alter the direction of its angle power connector if required. This product portrays standard electrical connections with its drive controller. The device must feature effective torque below the S1 continuous operating characteristics curve of the average speed for a critical cycle. This unit has a thermal time constant of 60 minutes. Its power cables can either be crimped or soldered based on the power connection. The motor connection must be undertaken only by an authorized electrician.  This servomotor is packed in custom military-grade packaging for transportation.