Product Description
The MAC090C-0-GD-4-C/110-B-0/WI522LV is an AC servomotor launched by Bosch Rexroth. The device is suitable for use in a variety of industrial equipment, including printing presses, transfer facilities, and packaging machinery. The motor has permanent magnets in its rotor. The product features electronic commutation. The device has one tacho feedback and a mounted incremental encoder as its feedback options. The nominal rpm of the winding of the unit is 3000 per minute. The servomotor supports maintenance-free operation because of its unique brushless design and the application of lifetime lubricated bearings.
The temperature of the MAC motor is monitored using thermos switches which are integrated into the windings and the stator housing. This setup prevents damage from overloads. The unit features a special winding design that helps it run smoothly. The device is highly suitable for use in precision lathes and grinding equipment. Connectors are used to directly connect the power, tacho feedback, and encoder cables to the motor. The product is well protected by its housing and covers, which, in build and design, comply with the guidelines present in DIN 40 050. These protective features safeguard the motor against penetration by water and extrinsic objects.
The MAC servomotor can be mounted in any position. However, when the device is mounted in IM V3 or IM V19 orientation, care should be taken to prevent water or other liquids from collecting at its output shaft for a long period of time. It must be noted that when the unit is stored for more than two years, it is important to grind it in before use. The output direction of the motor's power connection is towards side B, and it cannot be changed.