Product Description

The MAC090C-0-GD-4-C/110-A-0/WI552LX/S005 is a unique and state-of-the-art industrial motor designed by well-trained engineers of Rexroth Indramat to operate in combination with a compatible drive controller and form rapid response system that can meet the kinetic energy requirements of a broad range of industrial machines. This industrial motor is an environmentally friendly device that does generate a noise pressure higher than 75 decibels during operation. The housing of the motor contains a high metal content and provides the internal components motor with optimum protection according to the IP65 protection category. The MAC090C-0-GD-4-C/110-A-0/WI552LX/S005 industrial motor is very safe and easy to operate. However, operational safety is only guaranteed if it is carried out by well-trained engineers according to the instructions in the documentation of the motor.

The MAC090C-0-GD-4-C/110-A-0/WI552LX/S005 industrial motor is a permanent-magnet excited device. The permanent magnet present in the motor is made from special materials that allow the motor to maintain low inertia during operation. This industrial motor also features a feedback system that is a tacho-feedback and mounted incremental or absolute encoder. The feedback system converts the physical operation of the motor into electrical signals that can be interpreted by the connected drive controller and used to monitor and adjust the operation of the motor according to pre-determined configuration parameters.

The MAC090C-0-GD-4-C/110-A-0/WI552LX/S005 industrial moor is about 407 millimetres long with a centring diameter of about 140 millimetres. The total weight of the motor is also about 23 kilograms. The output shaft of this industrial motor is designed to support a high radial load; this output shaft features a shaft sealing ring that helps to prevent liquid from entering the motor through the shaft.