Product Description

The MAC090B-0-PD-4-C/110-B-1/WA611XX is an industrial servo motor produced by Rexroth Indramat to serve as a reliable source of kinetic energy for industrial production and processing machines. This industrial motor is a permanent magnet-excited device with electronic commutation, under ideal operating conditions this industrial motor maintains low inertia and can undergo continuous start-stop operation at a high repeat frequency. The housing of this industrial motor provides complete protection against external interference, this makes it possible for the motor to maintain an operational efficiency as high as 95 per cent even when it is being used in harsh operating conditions.

The MAC090B-0-PD-4-C/110-B-1/WA611XX industrial motor does not generate a very high amount of heat during operation, it also maintains an average nose pressure of about 70 decibels. Although this motor has been designed to be safe for industrial applications, the operational safety of the motor is only guaranteed if the motor is properly handled according to the instructions in the documentation supplied with the motor. The poor handling of this industrial motor can cause damage to the motor or personnel. The MAC090B-0-PD-4-C/110-B-1/WA611XX operates in combination with a compatible Rexroth intelligent drive controller, the combination of this industrial motor and the drive controller forms a rapid response automatization system that is well suited for machine tools, textile machines, robotics, transfer facilities and lots more.

The nominal input current required by this industrial motor during operation is about 11.9 amperes, at this current the motor generates a continuous output torque of 7.2-newton meters and operates at a nominal speed of 2000 revolutions per minute. The MAC090B-0-PD-4-C/110-B-1/WA611XX industrial motor is also designed with a standard blocking brake that retains the load connected to the motor shaft when the motor is at a standstill. This blocking brake generates a holding torque of about 6.5 Newton meters.