Product Description

The MAC071B-0-TS-4-C/095-A-1/WA610XX/S001 is an AC servo motor made by Bosch Rexroth. It is part of the MAC line of highly reliable servo motors featuring quick-response servo drives that are paired with DSC, KDS and TDM controllers. It is suitable for use in printing machines, robotics, and packaging machinery. The servo has a motor length of B and a motor size of 071. The usable motor speed, however, can vary depending on the type of drive used. The unit has a nominal motor speed of 3000min^-1 and uses natural convection cooling.

The product has a continuous torque at standstill of 4.4 (6.6) Nm and the rotor moment of inertia of the motor is 9.9 x 10^-4 kgm². It has a continuous current at standstill of 7.3 (11.7) amperes, while the maximum peak of pulse current is 37 amperes. At 20°C, the torque constant is 0.6 Nm/A and the windings resistance is 1.24 ohm. It also has a windings inductance of 10 mH. The unit has a mass of 8.8 kilograms without including the tacho-generator, holding brake, or blower.

The MAC071B-0-TS-4-C/095-A-1/WA610XX/S001 motor comes equipped with a tachofeedback and a mounted encoder. It has a standard tacho type and a centering diameter of 95mm. The motor housing of the servo motor is completely enclosed to meet IP 65 protection standards. Thus, it can be used in machines that are used in poor environments where it could come in contact with coolants or soluble oil emulsions. It features a 3 Nm standard blocking brake, which can be used to clamp the output shaft. The output direction of the power connector is to side A. We deliver the MAC071B-0-TS-4-C/095-A-1/WA610XX/S001 servo motor as well as other units in the MAC AC series to any location nationwide and offer a one-year warranty.