Product Description

The MAC071B-0-FS-4-C/095-B-0/WA610XX/S001 is a brushless low inertia permanent magnet AC servo motor by Bosch Rexroth. As the name indicates, this motor belongs to the MAC series motors, and MAC series motors are sophisticated motors that are designed to work with Digital Servo Controller, Technology Digital Motor, and Kollmorgen Drive SynqNet controllers. This particular motor is mainly used for automation and industrial purposes. This motor has an overall size of 071 and a length of 252 mm. This motor comes with a good IP rating (65), a low weight of 8.8 kg, and a perfect power-to-weight ratio. This motor has very low wear and tear due to its brushless design, integrated temperature monitoring, and lubricated bearings.

This motor does not have any fan or blower, and it typically has a typical natural convection cooling with a thermal time constant of 45 minutes. The rated speed of the motor is 2000 min-1 and continuous torque & continuous current at standstill are 4.4 Nm and 5.0 A respectively. The maximum current requirement of the motor (Ipeak) is 25.0 A and the rotor moment of inertia is 9.9 x 10-4 kgm^2. The winding inductance of the motor is 22 mH. The motor provides tacho feedback and incremental/absolute encoder and the tacho output voltage range is 3 Volt per 1000 min-1.

The motor comes with flexible mounting options and can be mounted via face mounting or flange mounting. This motor does not have any kind of blocking break and the power connector of this motor is towards the opposite side of the shaft and it requires at least 77 mm2 power cable. The motor has the output key with a keyway (per DIN 6885) that makes the perfect torque transmission.