Product Description

The MAC071B-0-FS-4-C/095-A-1/AM154SG AC servomotor by Bosch Rexroth can be mounted in any orientation. This motor is equipped with an absolute encoder. This product deploys a gray scan code for the functioning of its encoder. The device should not be cleaned using harsh cleansing agents. This unit can be operated in textile machines. Its encoder is used to provide feedback in addition to the existing tacho feedback. The motor has several salient constructional features that contribute to its high reliability. This product is not affected by the presence of coolants, soluble oil emulsions and the like. The device depicts a simple mounting process. This unit is protected against overload damage by thermo switches that monitor its temperature. Its encoder delivers an absolute position value that is available even when there is a power failure or in an emergency situation. The motor encounters a magnetic force on the brake armature disc at zero current. This product grind-in can be done by running it at nearly 100 rpm speed, closing the blocking brake for a minute and shutting down the drive after 60 seconds. The device relies on a hardware switch or a PLC to control its holding brake. This unit is designed such that it performs electronic commutation. It is excited by the permanent magnets in its rotor. The servomotor encompasses lubrication for a lifetime on its bearings under rated conditions. This product has a completely closed housing with an IP 65 protection class. The device features a rating plate on its housing. This unit is known for its high dynamic performance that results in its output data being very high.