Product Description

The MAC071B-0-FS-4-C/095-A-0/WI571LX/S001, which is an AC servo motor, has an approximate weight of 8.8 kilograms. Manufactured by Bosch Rexroth, this motor is a member of the MAC series. For this AC servo motor, the power consumption rated for axial and radial cooling is 22/22 Volts-Amperes (VA). When it comes to nominal voltage, for both axial and radial cooling, it is measured at AC 230 or 115 (alternate current). Their frequency rating is 50/60 (hertz/Hz). For the axial cooling, the mass is approximately . 0.8 kilograms, and for the radial cooling, the mass is approximately . 0.7 kilograms.

The following structural characteristics of this MAC AC servo motor lead to their outstanding level of reliability: Maintenance-free operation since the motor is brushless and has lifetime greased bearings. When it comes to temperature, the permissible ambient temperature for the operation state falls within the range of 0 to 45 degrees Celsius, and for storage and transport, the temperature range falls within -20 to +80 degrees Celsius. Users should not install this motor above an elevation of 1000 meters above sea- level.

The nominal motor speed for this AC servo motor is 2000 m/s. The continuous torque at standstill is rated at 4.4 (6.6) Nm. The continuous current at standstill is 5.0 (7.9). Its rotor moment of inertia is 9.9 x 10-4. The bearing assembly design enables the direct mounting of pinions and belt pulleys onto the shaft, allowing for high radial loads to be applied. The motor shaft undergoes a clear assimilation of external forces. The floating bearing on Side A of the motor is responsible for absorbing the radial forces. Side B is in charge of absorbing the axial forces.