Product Description

MAC063D-0-JS-4-C/095-B-1/WA604XX is a MAC series servo motor. It is designed for AC input. According to the product type code, the motor frame size is 063 and the frame length is D. A rating plate attached to the motor allows easy identification. Operators must inspect the motor at the time of delivery and verify its specifications. Any motor found to be damaged must not be installed. Operators can contact their local Bosch representatives to discuss details about any issues discovered during initial inspection. Speed rating of the servo motor is 3500 RPM. All MAC motors support tacho feedback. This feedback method relies on a tacho generator on the motor. The tacho generator measures motor speed, and provides real-time information to the connected drive controller. The motor is also equipped with an encoder for measuring motor shaft position.

Both types of feedback – speed and position – are sent to the controller through a dedicated feedback cable. Power for the motor arrives via a separate power cable. The motor power connector and the motor feedback connector must be ordered separately. The location of the power connector can be specified at the time of equipment ordering. On the MAC063D-0-JS-4-C/095-B-1/WA604XX motor the power connector is on side B of the housing. Centering diameter of the motor is 95 millimeters. Length of the motor is 200 millimeters. The flange measures 100 millimeters and each of the four mounting holes has a diameter of 9 millimeters. The MAC063D-0-JS-4-C/095-B-1/WA604XX motor is also equipped with a holding brake rated for 3 Nm holding torque. IP65 protection helps to protect internal components from dust and moisture. Mass of the motor is 5.3 kilogram and mass of the brake is 0.55 kilograms.