Product Description

The MAC063D-0-JS-4-C/095-B-0/WI569LX AC servomotor supports a standard holding brake. The Bosch Rexroth motor has JS windings code. This product needs a grounding to be done with the drive amplifier. The device can be used even under poor environmental conditions. This unit may get affected on its side A as a result of thermal deformations. It is designed to be installed at an elevation of 0m to 1000m above sea level. The motor has complete protection against the penetration of external objects. This product has a 3,500min^-1 nominal speed for its operation. The device has a 2 Hz to 9 Hz frequency range with sinusoidal oscillations.

This motor prime coat is completely resistant to diluted acids and lyes. The unit has to be associated with a plain shaft as much as possible. Its rotor has 4.8 x 10^-4 kgm² moment of inertia without the tacho generator and holding brake. This product must encompass a shaft sealing if it is used for applications where the effect of a jet of water or dirt can be present. The device has a possibility of getting damaged on the B side because of thermal stress by fitting drive pinions with helical teeth axially to a machine with bevel gear pinions. This servomotor encompasses a warranty tag of one year.

The motor has a 24 VDC voltage rating for the related holding brake. This unit-related drive has to be shut down after a minute as a part of the grind-in. Its angle connector can be turned in increments of 90° into the desired position. The product comprises the power cable connection plus connecting cables for the thermo switches and the holding brake in its power connection. This device incorporates a flanged socket with 12 pins on the housing for the encoder plus feedback connections. The unit-allied tacho feedback can be used in a machine used for applications with uniform rotations. This servomotor is sent to any destination in the world.