Product Description

The Bosch MAC063B-0-JS-4-C/095-B-1/WA604XX/S001 is a servo motor. It uses two types of sensors for measuring speed and position. A tacho generator is used to measure motor speed, and an encoder is used to measure shaft position. A tacho generator, also known as a tachometer, is a type of electromechanical device that is used to measure rotational speed. It converts the angular velocity of a rotating shaft into an electrical voltage signal. The basic design of a tacho generator consists of a permanent magnet rotor and a wound stator. As the rotor spins, it generates a magnetic field that induces a voltage in the stator winding. The frequency of the generated voltage is directly proportional to the rotational speed of the shaft. This voltage output can be used to monitor the speed of the shaft or to control the speed of a motor or other rotating machinery.

An encoder is a type of device used to convert the motion or position of an object into an electrical signal. It is used in automation and control systems to provide feedback on the position or speed of rotating shafts, linear actuators, and other mechanical devices. Rated speed of the MAC063B-0-JS-4-C/095-B-1/WA604XX/S001 motor is 6000 RPM. The output shaft includes a keyway and complies with DIN 6885-1. DIN 6885-1 is a German industrial standard that specifies the dimensions and tolerances for parallel keys and their corresponding keyways used in power transmission applications. The standard defines the parameters for parallel keys, including the keyway size, key size, and tolerance values for each dimension. The standard provides guidelines for the dimensions and tolerances of parallel keys with rectangular or square cross-sections. The motor is equipped with a blocking brake rated for 3 Nm holding torque.