MAC041C-0-TS-4-E/050-A-1/WI673LV/S001
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAC041C-0-TS-4-E/050-A-1/WI673LV/S001 AC servo motor offers a nominal motor speed of 2000 min⁻¹, a continuous torque at standstill of 9.2 Nm, and a mass of 13.0 kg. As a part of the MAC AC Servo Motors series by Bosch Rexroth Indramat, it features IP65 protection and operates within 0 to +45 °C ambient temperature.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC041C-0-TS-4-E/050-A-1/WI673LV/S001 is a permanent magnet excited motor design built to serve as a long-lasting solution for customers that require an accurate and consistent supply of torque for their industrial applications. This motor is a synchronous brushless device that is able to maintain low inertia through its operation processes; it also has a strong enclosure that shields it from common industrial interference like dust and water slashes. The MAC041C-0-TS-4-E/050-A-1/WI673LV/S001 synchronous motor unit can be used with either the TDM, KDS or DSC drive controller series; this combination forms a user-friendly automation system that is well suited for machines like handling equipment, transfer facilities, robotic machines, and printing presses. Heat is efficiently dissipated from the motor stator windings to the outside wall of the motor housing; this allows the motor to maintain a high overload capacity throughout its operation.
The MAC041C-0-TS-4-E/050-A-1/WI673LV/S001 motor is equipped with ball bearings that support loads connected to its output shaft; these bearings have a service life of about 20,000 power on hours. The design of this motor unit supports mounting in any orientation; however, environments where the motor is used should be kept at temperatures that are maintained below 45 degrees Celsius. Humidity levels should also be maintained below 95 per cent.
The MAC041C-0-TS-4-E/050-A-1/WI673LV/S001 industrial servo motor is delivered with a holding bake, which makes it possible for operators to clamp the output shaft at a standstill and to achieve a safe standstill when the power supply to the motor is off. The nominal operating speed of this motor unit during its operation is about 2000 revolutions per minute; it also has a torque constant of about 0.875 newton meters per ampere. The continuous input current requirement for this motor unit is 11 amperes while the torque supply is 9.2 newton meters.
Frequently Asked Questions about MAC041C-0-TS-4-E/050-A-1/WI673LV/S001:
Q: How long is the service life of this motor unit?
A: With proper handling, the MAC041C-0-TS-4-E/050-A-1/WI673LV/S001 can maintain its top operation performance for more than five years.
Q: Does the MAC041C-0-TS-4-E/050-A-1/WI673LV/S001 have an holding brake?
A: Yes. An holding brake is integrated into the housing of the MAC041C-0-TS-4-E/050-A-1/WI673LV/S001. It retains loads connected to the motor shaft when it is at standstill.
Q: Is the operation of the MAC041C-0-TS-4-E/050-A-1/WI673LV/S001 in food processing application permitted?
A: The MAC041C-0-TS-4-E/050-A-1/WI673LV/S001 features a black coating that makes it unable to meet the hygiene standards of some food processing operations.
Q: What is the peak installation height for the MAC041C-0-TS-4-E/050-A-1/WI673LV/S001 motor?
A: The maximum permissible installation height for this motor unit during operation is about 1000 meters above sea level.
Q: Is the MAC041C-0-TS-4-E/050-A-1/WI673LV/S001 delivered with connection cables?
A: Connection cables are not part of the delivery package of this motor. However, these cables can be ordered separately.
