MAC025B-0-ZS-4-E/040-B-0/WI670LV/S007
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAC025B-0-ZS-4-E/040-B-0/WI670LV/S007 servo motor is part of the MAC AC Servo Motors series and features incremental encoder feedback with standard mounting. It offers axial or radial cooling options and a protection category of IP 65. The motor supports power connections on four sides.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth Indramat MAC025B-0-ZS-4-E/040-B-0/WI670LV/S007 belongs to MAC AC Servo Motors that provides precise movement control in industrial automation systems.
This motor meets DIN 42955 requirements for shaft alignment and maintains nearly ideal mechanical position in advanced motion control systems through its tolerance class N (12/81). The motor comes with a DS M8-19 thread (DIN 332 section 2, 5/83 edition) that uses screws with a maximum tightening torque of 5 Nm. The flange meets DIN 42948 specifications from edition 11/65 to support both B5 and B14 designs in multiple mounting positions. Position feedback works through the standard setup of an incremental encoder to supply accurate signal feedback for closed-loop control systems. When tachofeedback mode activates, the motor yields 1.5 V per 1000 min⁻¹ for all speeds above 3000 RPM and 3 V per 1000 min⁻¹ for all speeds at or below it. Customers can choose power connection positions on either Side A, Side B, or the left and right sides according to how they install the motor. The MAC025B version offers two blocking brake choices plus standard (45 Nm) or heavy-duty (60 Nm) brake support for typical or heavy-duty load maintenance operations.
This device functions at 24 V DC ±10% voltage with a 12-pin flange connector that handles encoder and feedback input and output connections effectively. The motor achieves an IP65 protection rating, which makes it immune to both dust and water ingress. The motor system uses principal cooling techniques through axial and radial air movement. The minimum cable curve needs to be 40 mm when installed permanently and 90 mm when installed flexibly. The enclosure ground connects with the cable shielding system to maintain signal integrity and fulfill EM interference standards.
Frequently Asked Questions about MAC025B-0-ZS-4-E/040-B-0/WI670LV/S007:
Q: What mechanical standards does the MAC025B-0-ZS-4-E/040-B-0/WI670LV/S007 follow?
A: The MAC025B-0-ZS-4-E/040-B-0/WI670LV/S007 meets DIN 42955 for shaft alignment and DIN 42948 for flange compatibility, ensuring ideal alignment and versatile mounting.
Q: What encoder and feedback system does the MAC025B-0-ZS-4-E/040-B-0/WI670LV/S007 support?
A: This motor comes with an incremental encoder for closed-loop control, and in tachofeedback mode, it outputs 1.5 V per 1000 min⁻¹ above 3000 rpm and 3 V below.
Q: What brake options are available for the MAC025B-0-ZS-4-E/040-B-0/WI670LV/S007?
A: The MAC025B-0-ZS-4-E/040-B-0/WI670LV/S007 supports both standard 45 Nm and heavy-duty 60 Nm braking systems for effective load holding.
Q: How flexible is the installation setup of the MAC025B-0-ZS-4-E/040-B-0/WI670LV/S007?
A: Power connectors can be placed on Side A, Side B, or the left/right sides, and the motor allows a minimum cable bend of 40 mm (fixed) or 90 mm (flexible) for easy setup.
Q: What environmental protections and standards does the MAC025B-0-ZS-4-E/040-B-0/WI670LV/S007 meet?
A: The MAC025B-0-ZS-4-E/040-B-0/WI670LV/S007 is IP65-rated, supports 24 V DC ±10% supply, and includes shielding for EMC compliance through grounded cable connections.
