Product Description

Bosch Rexroth provides services in the manufacturing of different automation equipment. The company cares about customer satisfaction and also provides maintenance services to its clients.

The KSM01.2B-061C-35N-M1-HG2-SE-NN-D7-NN-FW model operated at the voltage of DC 750V through a KCU electronic control system. The model operates ideally between the temperature ranges of 0 to 40 ͦC. The model comes with a standard length of 061 and a winding code of 061C with a total weight of approximately 10 kg. The protection class of IP65 and insulation class of 155 is used in this model which provides resistance from ingress of dirt and low-pressure water jets. The Mi distributed servo drive delivers the constant torque of 2.03 Nm/A at 20 ͦC. The maximum current of 14.9 A is required for delivering the maximum torque of 25 Nm. The Mi distributed servo drive comes with intelligent communication, optimal design with maximum flexibility, and easy to install. The model uses ambient air for cooling purposes through natural convection.

The model KSM01.2B-061C-35N-M1-HG2-SE-NN-D7-NN-FW uses a hybrid cable for power supply and communication via SERCOS 2 protocol. The model comes with an Optical encoder, multiturn-absolute Hiperface with 128 increments to convert angular displacement into a digital form. Plain shaft with sealing rings is used in the model with electrically released DC 24V holding brake. The circuit can bear the maximum current flow of 42000 A_rms with the rated power of 930 W. Voltage required for the internal data bus is DC 30 to 42V with the rated power consumption of 33.5 W. The model is listed as UL 508 C according to the UL standard. The firmware for this model must be ordered as a separate sub position. This unit can be shipped globally with a one-year warranty period from Wake Industrial.