4.95 based on 203 reviews

🙶 We have never had a problem in the almost 20 years we have dealt with Wake. We would recommend them to any... 🙷

KSD076C-0350-NN-S1-1P2-NNNN Bosch Rexroth Indramat

Ask for Availability

Preparing your secure checkout page...

The Bosch Rexroth Indramat KSD076C-0350-NN-S1-1P2-NNNN is part of the KSD IndraDrive Mi Motors series. This motor provides a continuous torque of 8.7 Nm with a holding torque of 16.0 Nm and a maximum torque of 29.0 Nm. It features an IP65 degree of protection, a flange size of 140 mm, and a rated power of 1240 W.

Warranty
Wake Industrial Warranty

Quote Request Form:

To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The KSD076C-0350-NN-S1-1P2-NNNN servo motor is manufactured by Bosch Rexroth Indramat and belongs to the KSD IndraDrive Mi Motors series. This model is intended for industrial automation applications that require precise, decentralized axis control. By converting electrical energy into tightly regulated mechanical rotation, it drives positioning or conveying tasks while occupying minimal panel space.

Under continuous duty, the motor sustains 8.7 Nm of torque, giving it the capacity to support moderate loads without overheating. At the nominal operating point, it converts electrical input into a mechanical output of 1240 W, matching medium-power axis demands. During transient events, the line current can rise to 17.7 A, which helps determine suitable upstream fuses and cable cross-sections. Current-to-torque conversion is characterized by a constant of 1.85 Nm/A, enabling drive controllers to predict torque from measured phase current with straightforward scaling. Dynamic performance is supported by the low rotor inertia of 0.00446 kg·m², allowing short acceleration ramps. A 24 k6 mm shaft couples the rotor to the machine through a key measuring 8 × 7 × 40 mm, while a 110 j6 mm pilot in a 140 mm square flange maintains concentric alignment. The 290 mm housing length keeps the motor compact for installation in confined mounting spaces.

For short bursts, the available torque peaks at 29.0 Nm, supplying additional force during acceleration or process disturbances. When the rotor is stationary, the brake provides 16.0 Nm of holding torque to resist back-driving. This clamping function engages within 30 ms after receiving a command, and it releases within 50 ms to permit quick transitions between motion and standstill. The entire assembly is sealed to IP65, protecting internal components against dust ingress and water jets in washdown areas.

Clamping Delay
30 ms
Continuous Torque
8.7 Nm
Degree Of Protection
IP65
Flange Size
140 mm
Holding Torque
16.0 Nm
Key Size
8 x 7 x 40 mm
Maximum Current
17.7 A
Maximum Torque
29.0 Nm
Overall Length
290 mm
Pilot Diameter
110 j6 mm
Rated Power
1240 W
Release Delay
50 ms
Rotor Inertia
0.00446 kg*m2
Shaft Diameter
24 k6 mm
Torque Constant
1.85 Nm/A

Frequently Asked Questions about KSD076C-0350-NN-S1-1P2-NNNN:

Q: What is the continuous torque rating of the KSD076C-0350-NN-S1-1P2-NNNN motor?

A: This model provides a continuous torque output of 8.7 Nm for sustained load operation.

Q: What level of environmental protection does the KSD076C-0350-NN-S1-1P2-NNNN offer?

A: The KSD076C-0350-NN-S1-1P2-NNNN has a degree of protection rated at IP65, making it resistant to dust and water jets.

Q: What is the flange size of the KSD076C-0350-NN-S1-1P2-NNNN motor?

A: This motor is equipped with a flange size of 140 mm.

Q: What is the maximum current rating of the KSD076C-0350-NN-S1-1P2-NNNN motor?

A: The maximum current supported by this model is 17.7 A.

Q: What is the shaft diameter of the KSD076C-0350-NN-S1-1P2-NNNN motor?

A: The shaft diameter for this unit is 24 k6 mm.


Internal Product Review

  • ‘‘The KSD076C-0350-NN-S1-1P2-NNNN is a Bosch Rexroth IndraDrive Mi motor rated at 1240 W with 8.7 Nm continuous torque. IP65 protection and 29.0 Nm maximum torque support dependable servo performance in enclosed industrial machinery. A 16.0 Nm holding torque stands out as a strong advantage for controlled positioning and secure axis retention.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo