KSD061C-0610-NN-S1-1P0-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat KSD061C-0610-NN-S1-1P0-NNNN is part of the KSD IndraDrive Mi Motors series and has a rated power of 800 watts. This motor features a maximum torque of 18 Nm, a maximum current of 17.7 amps, and IP65 degree of protection. It includes a single-turn Hiperface encoder with 128 periods and a shaft style according to DIN 6885 keyway.
Internal Product Review
The KSD061C-0610-NN-S1-1P0-NNNN is a Bosch Rexroth IndraDrive Mi motor with 800 W rated power and 18 Nm maximum torque. IP65 protection and a single-turn Hiperface encoder with 128 periods support dependable closed-loop performance in demanding machine sections. From a drive integration standpoint, 5.5 Nm standstill torque gives the motor a strong low-speed operating margin.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The KSD061C-0610-NN-S1-1P0-NNNN belongs to the KSD IndraDrive Mi Motors series produced by Bosch Rexroth Indramat. It is a distributed servo motor with an integrated drive section, intended for compact machine axes where power electronics can be mounted directly on the motor housing. By combining the drive and motor in one unit, it reduces cabinet wiring and supports modular assembly lines that require decentralized motion control.
The electrical section delivers a rated mechanical output of 800 W while drawing up to 17.7 A of peak phase current during dynamic moves. At the peak current, the shaft can supply 18 Nm of instantaneous torque for acceleration or recovery from sudden load changes. During continuous holding, the windings draw a standstill current of 5.2 A and generate a constant holding torque of 5.5 Nm without exceeding thermal limits. Torque increases proportionally with current according to a torque constant of 1.16 Nm/A, which supports accurate current-loop control in the IndraDrive system. Position feedback is provided by a single-turn Hiperface encoder with 128 sine-cosine periods per revolution. This encoder supports high-resolution commutation and reports the absolute shaft position after power-up.
The motor uses an IM B5 flange-mount pattern for direct attachment to a compatible machine surface. A DS M6 centering hole aligns the housing, while the shaft has a DIN 6885 keyway that accepts a 6 × 6 × 32 mm key for positive torque transmission. The maximum permitted axial force on the shaft is 20 N, so the selected coupling must prevent excessive thrust from reaching the bearings. The IP65 enclosure blocks dust and resists low-pressure water jets, allowing the motor to operate outside a control cabinet. Its integrated position feedback removes the need for a separate external position sensor. The motor wiring is arranged to maintain a compact distributed architecture and reduce the number of connections routed to the main cabinet.
