Product Description:

The KSD061C-0350-NN-M3-1G0-NNNN is an integrated servo motor from Bosch Rexroth Indramat that belongs to the KSD IndraDrive Mi Motors series. Designed for decentralized machine concepts, this unit combines power electronics and a synchronous motor in one enclosure to deliver closed-loop axis control directly on the machine frame. In automated packaging, printing, or material-handling lines, the motor converts drive commands from an IndraDrive controller into precise rotary motion while eliminating separate cabinet-mounted inverters.

It delivers a continuous shaft torque of 6 Nm when supplied with a steady phase current of 3.3 A. For acceleration peaks, the drive section can supply up to 14.9 A, allowing the rotor to reach a short-term torque ceiling of 25 Nm. Mechanical output power at the nominal operating point is 0.895 kW, so the axis suits moderate-load tasks such as pick-and-place heads or small feeders. Position feedback is provided by a capacitive Hiperface multi-turn encoder that delivers 16 signal periods per mechanical revolution, enabling high-resolution absolute position reporting over multiple turns without battery backup. This combination supports continuous operation with reserve current for brief indexing peaks.

The housing measures 219 mm in height, 271 mm in width, and 115 mm in depth, allowing direct mounting inside narrow machine columns. A rotor inertia of 0.00087 kg·m² keeps servo response quick while still smoothing small load disturbances. The housing is sealed to IP65, so dust ingress and low-pressure water jets do not compromise the internal electronics. A shaft sealing ring prevents lubricant leakage and helps protect the encoder from splash contamination. This layout allows the motor to be mounted close to the driven mechanism and helps reduce cable runs.