KSD061C-0350-NN-M1-1P0-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat KSD061C-0350-NN-M1-1P0-NNNN is part of the KSD IndraDrive Mi Motors series and has a flange size of 115 mm with a mass of 9.5 kg. This motor features a continuous stall torque of 6.0 Nm and a torque constant of 2.03 Nm per amp, and it is rated IP65 for protection. The motor delivers a rated power of 930 W with a maximum torque of 25.0 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The KSD061C-0350-NN-M1-1P0-NNNN integrated servo motor is manufactured by Bosch Rexroth Indramat for the KSD IndraDrive Mi Motors series. By combining power electronics with a permanent-magnet rotor in a sealed housing, it provides decentralized motion control for indexing tables, carton erectors, and multi-axis handling systems. The unit converts DC-link energy from the machine bus into torque and speed at the shaft, supporting precise closed-loop positioning tasks in automated equipment.
At the shaft, this model can sustain a continuous stall torque of 6.0 N·m, providing a baseline load value when the axis is stationary without airflow. For acceleration bursts, it can produce a maximum torque of 25.0 N·m, accommodating rapid starts or reversals. Electrical demand during those peaks is limited by a maximum current of 14.9 A, allowing appropriate selection of drive-bus fuses and cabling. The motor's thermal design supports a rated output of 930 W under nominal operating conditions. Its back-EMF constant is 125 V per 1,000 rpm, and internal losses account for 140 W of heat dissipation. The torque constant of 2.03 N·m/A links commanded current to developed torque and supports predictable current-loop tuning in the IndraDrive controller.
The housing has a protection rating of IP65, allowing installation on machine frames exposed to dust and low-pressure water jets. A square flange measuring 115 mm provides alignment with gearboxes or belt-drive assemblies, and a keyed shaft transmits motion through a 6 × 6 × 32 mm key. The shaft withstands an axial load of 20 N. The motor weighs 9.5 kg, while its rotor inertia of 0.00087 kg·m² supports rapid speed changes without excessive drive overshoot. A thermal time constant of 18 min indicates how quickly the winding temperature responds to changing loads, helping the thermal sensor monitor heating during cyclic operation.
