IKS4035 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
21 Seconds
The Bosch Rexroth Indramat IKS4035 is part of the IKS Encoder Cables series and features a total shield with a PUR jacket in RAL 2003 orange. It utilizes D-Sub 15-pin connectors for both controller and encoder ends and is suitable for drag chain use, supporting up to 5,000,000 bending cycles. The cable's bulk type is INK0209, with a maximum conductor temperature of 80 °C and an outer diameter of 8.8 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The IKS4035 is a flexible encoder feedback cable from Bosch Rexroth Indramat and belongs to the IKS Encoder Cables series. It links incremental or absolute measuring systems with Rexroth drive controllers so position data is transferred reliably during dynamic machine motion. By matching the electrical characteristics used by these control systems, the cable serves as a dedicated interface for drag-chain routing in packaging equipment, gantries, and material-handling axes where continual bending and noise suppression are necessary.
Its mechanical endurance is rated for 5,000,000 bending cycles, indicating the number of drag-chain movements the conductors and insulation are designed to withstand in repeated flexing service. Signal integrity is supported by shielded twisted pairs that follow the INK0209 bulk cable design, helping differential encoder channels resist electromagnetic interference. The overall diameter of 8.8 mm supports clamp and conduit sizing while still allowing compact routing in cable chains. A Total shield made of tinned copper braid encloses the control and power cores and provides a low-impedance path to ground for high-frequency noise. Two power lines with a cross-section of 2x1.0 mm² supply the encoder electronics and help reduce voltage drop over longer cable runs.
The controller side terminates in a D-Sub 15-Pin (INS0760) controller plug, while the measuring head end carries a matching D-Sub 15-Pin (AEH) encoder plug, allowing direct connection without custom wiring. A wear-resistant PUR jacket in RAL 2003 protects the braid from oils and cutting fluids and remains suitable for storage from −30 °C to +40 °C. During operation, the copper conductors may reach a maximum of 80 °C, so the cable can be installed near warm gearboxes or motor assemblies without overstressing the insulation. The jacket also supports the flexibility needed for repeated motion in drag-chain applications.
Frequently Asked Questions about IKS4035:
Q: What is the maximum number of bending cycles the IKS4035 can handle?
A: The IKS4035 encoder cable is suitable for up to 5,000,000 bending cycles, making it ideal for repeated motion applications.
Q: What type of controller connector is fitted on the IKS4035 cable?
A: The controller connector on the IKS4035 is a D-Sub 15-pin (INS0760) connector.
Q: What type of shielding does the IKS4035 encoder cable offer?
A: This cable is equipped with a total shield design, providing comprehensive electromagnetic interference protection.
Q: What is the jacket material and color of the IKS4035 cable?
A: The jacket of the IKS4035 is made from PUR material and comes in RAL 2003 orange coloration.
Q: Is the IKS4035 suitable for drag chain use?
A: The IKS4035 supports use in drag chain applications, accommodating continuous flexing environments.
