IKS4002 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The Bosch Rexroth Indramat IKS4002 is part of the IKS Encoder Cables series and features a total shield with an outer diameter of 9.7 mm. It uses a PUR jacket colored orange, and supports a maximum conductor temperature of 80°C. The cable includes three control pairs at 0.25 mm² each, operates with supply wires of 2 x 1.0 mm², and uses a 1Vss signal type.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The IKS4002 encoder cable is produced by Bosch Rexroth Indramat within the IKS Encoder Cables series. As a pre-assembled interconnection between 1Vss encoders and drive controllers, it maintains differential signal quality during axis positioning, and its mechanical design supports both fixed routing inside cabinets and dynamic routing along moving machine axes in industrial automation lines.
Electrical conductors follow the bulk cable specification INK0720, giving three screened control pairs of 3 x (2 x 0.25 mm²) for incremental channels and two power cores sized 2 x 1.0 mm² for sensor supply. A molded controller-side connector coded INS0761 mates directly with compatible Indramat drives and seals the braid to the housing to keep electromagnetic emissions low. The orange jacket has an outer diameter of 9.7 mm and is rated for a maximum conductor temperature of 80°C, so current-related heating and ambient warmth up to 40 °C remain within insulation class limits. A total copper shield surrounds all pairs to block external noise, and the RAL 2003 coloration aids visual identification along energy chains.
Flex applications are supported by a minimum bend radius of 7.5 x D for moving runs and 5 D for fixed routing; this dynamic specification works with the encoder-side plug labeled INS0639 to prevent strain on pin terminations. The jacket compound is a halogen-free PUR, providing abrasion resistance and oil tolerance during continuous chain cycles. Motion loops using sinusoidal feedback benefit from the shielded transmission of the 1Vss signal type; the design keeps phase shift and amplitude deviation within controller tolerance. During machine operation the cable tolerates ambient temperatures from −20 °C to +40 °C, and its overall shielding supports low micro-break rates over long service intervals.
Frequently Asked Questions about IKS4002:
Q: What is the jacket color and material of the IKS4002 encoder cable?
A: The IKS4002 encoder cable uses an orange PUR jacket identified by RAL 2003 for increased visibility.
Q: What is the maximum conductor temperature for the IKS4002 cable?
A: The maximum conductor temperature for the IKS4002 is rated at 80°C.
Q: What are the minimum bend radii for the IKS4002 encoder cable in fixed and flexible applications?
A: This model supports a minimum bend radius of 5 times the cable diameter for fixed installation and 7.5 times the diameter for flexible use.
Q: What type of shielding is used in the IKS4002 encoder cable?
A: The IKS4002 cable features total shielding to enhance signal integrity.
Q: What signal type does the IKS4002 encoder cable support for encoder connections?
A: The signal type supported by the IKS4002 cable is 1Vss, suitable for specific encoder applications.
