IKS0334 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
The Bosch Rexroth Indramat IKS0334 is part of the IKS Encoder Cables series and features a PUR jacket with an outer diameter of 8.8 mm. This cable has a nominal voltage rating of 300 V, can handle up to 5,000,000 bending cycles, and supports a maximum acceleration of 20 m/s². It uses a conductor configuration of 4x2x0.25 mm² plus 2x1.0 mm² and has a sheath in RAL 2003 orange.
Internal Product Review
The IKS0334 is a Bosch Rexroth Indramat encoder cable designed for dynamic motion applications, featuring a durable PUR jacket and a conductor configuration of 4×2×0.25 mm² plus 2×1.0 mm². Rated for up to 5,000,000 bending cycles and 20 m/s² maximum acceleration, this cable is well-suited for demanding industrial environments. Its high bending endurance makes it a reliable choice for continuous flex applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The IKS0334 encoder cable is produced by Bosch Rexroth Indramat and belongs to the IKS Encoder Cables series. It carries differential encoder signals between rotary or linear feedback devices and compatible drive controllers in machine tools, packaging lines, and assembly cells. Stable transmission of feedback data is important for closed-loop motion because the drive relies on clean position signals to regulate speed, direction, and stopping accuracy. The cable is intended for industrial installations where repeated movement, tight routing paths, and electrical noise can interfere with low-level feedback signals. Its flexible construction helps it follow moving axes without placing unnecessary stress on the connected feedback hardware.
The cable uses a conductor layout of 4×2×0.25 mm² + 2×1.0 mm², so four signal pairs share the bundle with two larger power leads for auxiliary supply circuits. Its insulation and outer sheath are made of PUR, which resists mineral oils and continuous flexing while remaining halogen-free. With an overall diameter of 8.8 mm, the assembly fits standard drag-chain separators without excessive fill. It is rated for 300 V, which suits the extra-low-voltage range commonly used by encoder electronics. The bright RAL 2003 (Orange) sheath also helps with visual identification in crowded cable trays and moving cable carriers.
A service life of 5,000,000 bending cycles supports long duty in gantry and pick-and-place axes where repeated motion can wear less flexible cables. During machine start-stop profiles, the assembly tolerates longitudinal loads up to 20 m/s², helping keep conductor geometry stable under rapid carriage travel. For static routing, the cable can be clamped at a minimum radius of 5 × Ø. Moving installations should observe a minimum radius of 10 × Ø to reduce the risk of kinking at the chain hinge. These bending limits are suited to cable-track systems that cycle frequently through short reversing movements.
